Attack of the Bra Clone!

I’m not a Star Wars fan (I don’t mind it, but I am a fan of Star Trek all the way; I prefer technical scifi), but I can never resist a geeky reference in a blog title or anywhere really.

Disclaimer: This is the post of lists….. So many lists in this post. I like lists.

Long time no post btw. I lost my sewjo for a bit, but it was a busy non-sewing February so I don’t feel bad for taking a break from sewing. After all I made in January, it was good to have a break.

I made my first bra back in November and didn’t return to bramaking. I got a lot of “when are you making another bra?” questions from my surprisingly interested fiance and I gave him a lot of “um….after this thing….” and then it would be after the thing and I’d start another thing. I put off making another bra, because…to be perfectly honest…I hated my first one. I wear it, but it’s not comfortable at all.

Here are the issues I had with it:

1. The underwire is too small: pokes into my arm and cuts into the breast tissue on the side.

2. The bridge doesn’t sit against my chest.

3. The band is too big and the underwires under my cup don’t sit flat.

4. The cup doesn’t fit snugly under my arm.

5. The cup is not big enough and the shape doesn’t work for me.

6. The straps are too long and don’t provide enough support.

I have been feeling pretty discouraged by the whole process. I have three RTW bras that fit me almost perfectly, but they are wearing out and I refuse to buy more bras when I have all this material waiting to be transformed into bras…

Here are my issues with my RTW bras:

1. The cup doesn’t fit snugly enough under my arm.

2. The upper cup isn’t large enough, but the lower cup is perfect.

3. The bridge doesn’t sit against my chest.

There are two solutions to these problems:

1. Stretch the elastic a little tighter on the cup under the arm and possibly raise the underarm scoop slightly.

2. Heighten the upper cup.

3. Increase the cup size (possibly fixed by heightening the upper cup).

I don’t even want to get into all that would need to be done with the other pattern. I got it in my head that I wanted to make a pattern out of my RTW bras and then tweak from there. Of course, I had no idea how to do that and, being a beginner or advanced beginner at best, I felt pretty ill-equipped to handle such a task.

So I researched it:

I started searching for solutions to this and looking at my first made bra with a critical eye. I read Norma Loehr’s Demystifying Bra Fitting and Construction over and over and then researched boob shapes and what I needed to help the girls out. Luckily, I found Anne at the Clothing Engineer and all sorts of wonderful links and posts there. Her post on why the Marlborough didn’t work for her really enlightened why the classic bra from pin up girl patterns doesn’t work for me (it can work for a lot of people, but just isn’t good for my shape). Anne posted a link to boob shapes from Linda Unhooked and I found out why the classic bra didn’t work for me.

I’m a full circle:

The-Full-Circle

Which means I am just full everywhere: on top, underneath, on the side. I have big round girls and they fill in bras. In RTW, I am a 38-40HH. The bra I cut out for my class was a 48F: way too big in the band and way too small in the cup. I think the major issue with where they fit me was that they didn’t accommodate the side boob I have from being super full everywhere and so the RTW bra at the time they considered ill-fitting because the wire went back so far and the wire was bent out of shape from almost two years of wear (I wear my bras until they literally fall apart, because they are so expensive). Of course, I should have spoken up at the time. I’m actually really shy in a lot of situations and don’t speak up enough, especially when it comes to things I am unsure about like bra fitting or time travel paradox or particle acceleration. I liked where the RTW underwire was located and wanted to keep it that way and should have stated that. Of course, that means having a fuller cup. Overall, I just don’t feel like the classic bra is structured enough for the fullness of my girls and felt the support wasn’t there.

What bras work for me?:

Bras with more room in the upper cup and bras with something I now know is called a power bar (thanks Megan!).

My RTW bras are all Elomi bras with a similar shape like this:

CAITLYN-CAMELIA-UNDERWIRED-SIDE-SUPPORT-BRA-8030-BRIEF-8035

This is the Caitlyn side support bra. The power bar is the cup piece along the side of the cup closer to the underarm; it extends from the lower cup to the upper cup and includes the strap attachment. There are two pieces to the lower cup and then a wide upper cup that extends above both lower cups. The power bar is meant to provide extra support and push the girls forward. Two lower cup pieces provide a structured shape and the large upper cup provides enough coverage to avoid the dreaded quad booooob!!!! Scary stuff there. This is the perfect shaped bra for me. (edit: the Shelley full band bra from Pin up Girl patterns is basically the same as the Elomi bra above, if you are looking for a similar pattern with the two piece lower cup. I meant to talk about this in the post, but realized later I left out this tidbit.)

Why is cloning a bra a better option for me than buying?:

1. Elomi bras range from $70-$200 for me at my local specialty bra store here in Canada in my size.

2. Online shipping/custom charges from the States or UK don’t save me any money on the above costs even with great sales which do not happen often.

3. Limited choice of colours and styles (I like a rainbow of colours and can only seem to get black and beige here in Canada most of the time…)

4. Working with a cloned bra as a base means more options, cheaper options, and a heck of a lot happier Andie.

So, I set out to clone my Elomi bra.

Seeing how Anne cloned her Panache bra set me on a mission. I investigated methods and chose the pins in a cork board or, in my case, cardboard method from her post. Michelle’s creations also show pictures of this process in her post. Apparently the Bra Maker’s Manual has a chapter on cloning a bra, but I have yet to buy this book.

You first have to take the underwires out of your bra. This can be done without destroying the bra, but luckily I had a bra with the underwires popped out already from it being worn out. Then you pin it with tissue paper between the cardboard and the bra. Pin close to the seamlines around each piece very carefully (those pin holes will connect the dots for your bra pattern. You may also want to wear a thimble. I didn’t and my finger tip is numb now. Bad decision Andie.

IMG_20150221_133822217 IMG_20150221_132535232

IMG_20150221_130012657IMG_20150221_125112191

IMG_20150221_122745762IMG_20150221_131204772

After you pin, you remove the pins once you are happy with it and connect the dots with a pencil. Then you add quarter inch seams around the pieces.

IMG_20150221_123717

(sorry, I was using my phone camera instead of the DSLR through this so the photos are not good quality…)

If you have a power bar or places where the elastic was stretched and then sewn on, be sure to get the piece to lay flat. It’s a fiddly process and requires a lot of patience. You may also want to note on the pattern pieces where the elastic was stretched so that you will get it right for your test bra.

IMG_20150221_142740699_HDR

I had almost perfect fit the first time around with a few, but totally fixable issues.

IMG_20150222_121941 IMG_20150222_152957

There were a few mistakes I made:

1. I didn’t pull the elastic tight enough in the underarm area of the power bar.

2. I didn’t install the bottom elastic properly and you can see it peaking out more than it should (you are only supposed to see the scalloped edge there). I had my classic bra pattern instructions next to me, but completely spaced on the band elastic method.

IMG_20150223_163927454

3. I shouldn’t have added seam allowances to the bridge (the area between the cups), because I pinned on the other side of the wire (in the seam allowances) and not in between in the bridge (d’oh).

4. My machine should have been completely cleaned out and maintained before I started, because it wasn’t working well and didn’t sew properly so my stitches are messy messy messsssssy (embarrassingly so!).

5. I didn’t account for the extra stretch in the upper cup, because I didn’t use anything to stabilize it and so I made a dart in the upper cup to account for the fit.

IMG_20150223_214945

IMG_20150222_175548

Overall, though, the fit is good. So much better than my first made bra, which I wear but feel very uncomfortable in. I altered the pattern pieces for the bridge (narrowed it), band slightly (just to fit the closures), and reduced the length of the upper cup from arm to bridge to account for the stretch fabric and then heightened it a little more to account for the bridge not sitting perfectly (not pictured).

IMG_20150222_180650

It’s not bad for my second bra imho. I’m not Lauren in terms of kicking ass at making bras (one day I will be!), but I don’t nearly match Lauren’s skill. I think it’s good for my level. Tons to learn and perfect, but I am really pleased with it. You can see the original (very worn) bra above and the cloned bra in the middle with my first bra at the bottom. It’s quite a difference between the three with the best fit one in the middle: mine!

IMG_20150223_163831818

I’m not going to plunge right into the next one, because I want to wear it and see where else I can improve the fit. I try to do this for all the things I make and I try to do this before I blog.** I find wearing a garment really changes how you think about it. There will be more issues that arise with how it wears. All in all, it’s pretty exciting to have a bra pattern to work with that I am excited for.

I plan on making a turquoise bra and a fushia bra in the below fabrics and possible laces.

IMG_20150223_170912082

I will be making some knickers.  I also have a good underwear pattern that I cloned from my best fitting pair of underwear. Cloning all the things! My wearable muslin fits well, but I will be making some tweaks for the next versions. I’ll talk more about that when I have a few million more pairs to show you and I’ve figured out the fit/style I want.

**I didn’t wear my white Bronte top before blogging about it and I regret it. I didn’t even pay attention to the pictures or think about the fit, because the post was mostly about the skirt and I was dazzled by the pretty insides of my top. I will talk more about this in a future post, but the neckline clearly stretched out as I sewed it. Looks nice flat, but wavy on me. 😦

Advertisements

25 thoughts on “Attack of the Bra Clone!

  1. Good job on cloning your bra, Andie! Getting your fit is the biggest deal in all this; the sewing isn’t that challenging, and it sounds like you’re well on your way. Congratulations!

    • Thanks, Michelle. I got inspired by your lovely garments. 😀 Glad I found your blog in my research. And yes, fit is the biggest challenge. So happy I am getting over that hurdle. 🙂

  2. This is fantastic! I’ve been so excited to see how many people are making bras now and definitelt want to try it out. How else do we get rid of all those awkward fit problems with RTW bras?! Good job!!!

    • Thanks, Elana. 🙂 I’m excited to make better versions of this. I’m still pretty ashamed of the stitching on it. It’s so messy. :/ But the fit is great and I can’t wait to see the improvements in the next version. 🙂 You should totally try making a bra! It’s really addictive.

    • The sewing part isn’t that difficult. There are some fiddly parts with the wire channeling, but for the most part, it’s not bad. It’s the fitting that will give you a temper tantrum. 😉 But my disclaimer is that I am really difficult to fit in RTW so if you can find a bra relatively easily in the stores, the fitting should go well for you.

    • Oooh, I can’t wait to see your versions! 🙂 It’s amazing how the styles change based on the personality of the sewist. I can guarantee mine will all be colourful with little ribbons and lace details. 🙂

  3. Well done! Cloning sounds like a great idea… Mine also get worn out so quickly. I even handwash my bras gently and then it still does not help the situation. And what the hell is up with the black, beige and white? I can also hardly ever find pretty underthings in rainbow colours. (In South Africa that is) It feels like they(society) are trying to say that once you are larger than a certain size you are not supposed to be sexy and be content with beige grannypanties and bras! pfffft….Okay there are one or two speciality stores here, but you need to sell your liver on the black market to afford a bra and pantie set…By the way – where is the floating ghost bra? lol

    • Thanks, Marike! 🙂 Cloning is honestly the best thing for me. I’m so difficult to fit even in RTW bras. :/ Aaaand I pay for them with my liver and kidneys! lol. Aren’t white/black/beige bras the worst? I think they must believe that we are too relieved to find a bra in our size that we don’t care about colour and feeling sexy…. :/

      Heheh, I will try to see if I can do a floating ghost bra for the next one, but my skills at photoshop are not good. I’ll try, though. 🙂 I do like when Lauren posts the floating ghost bra pictures. 🙂

    • Hi Marike. Cloning is fine if you have a nice bra that fits, but the ones I find here in South Africa are either real “passion killers” or as you say, too expensive. But I found a nice pattern company who also sells all the supplies you need. E-mail me if you want info (ilnac(at) telkomsa dot net)

      • Hi Ilna, thank you! I will definately email you for that info, because even though I have spotted some bra-making supplies here and there, there are still a few elusive items. I also don’t really have a perfect bra in my closet to clone:( Will be interested to see what this pattern company has to offer.

  4. Those are all some really useful links and so very informative. I really didn’t realize about how boob shapes affect what type of bra will work for you. This really helps me a lot and is very encouraging. I can’t wait to see more of your bras and it’s so awesome how good of a fit that you got! 🙂

    • I was really fascinated by the boob shape thing. It makes total sense and when I’ve gotten fitted before they’ve talked about how I need a certain type of bra to get the right coverage. I’ve also been reading up on what goes into making a larger cup bra and how the fitting is so much more difficult than with smaller cups. It makes me really value being able to make it for myself and understand why it does cost so much for my size… I’m so very happy that I got that fit right. 🙂

  5. Very informative links! I think I’m a teardrop/wideset. I tend to just go to the bra shop down the street, which stocks an incredible ranges of sizes and styles, and I have them fit me. They literally bring you like 20 things to try on, and they stay right with you and assess how every single one fits you. It is expensive, but not as bad as what you pay in Canada (Elomi will run $50-$75, which isn’t so bad considered it’s spread out over a year or so of wear). If you’re ever in Austin, you gotta go!

    They also taught me the “correct” way to put on a bra to help your breast tissue get situated in the cup best. Once you put on the bra, bend over a give a tiny little shimmy. Grab the underwires on the sides and make sure they are sitting behind the breast tissue on the sides. This little trick makes bras fit a lot nicer, and then you understand why you need a smaller band!

    • My local bra store taught me that too! 🙂 Before then, I was wearing bands that were so huge and having horrible back problems and I found the same issue with the first bra I made. :/ I love proper bra shops. 🙂

  6. Pingback: Winter Round-up and Spring Sewing plans | Sew Pretty in Pink

  7. Hi Andie,
    I love how your bras turnded out.
    I’ll try this cloning method at some point. I have some RTW bras that fit excellently, but as you mentioned, the colors available for our sizes in Canada are mostly neutrals.
    I’ll let you know how it goes!
    M

  8. Pingback: The lavander bra with a pop of pink! | mexicanpink

  9. Pingback: The Wedding Lingerie | Sew Pretty in Pink

  10. Pingback: Tutorial on Sewcialists blog! | Sew Pretty in Pink

  11. Pingback: Desert Sunset Bra | Sew Pretty in Pink

I love comments, but sometimes I may be slow to respond/approve. I will respond though. :)

Fill in your details below or click an icon to log in:

WordPress.com Logo

You are commenting using your WordPress.com account. Log Out / Change )

Twitter picture

You are commenting using your Twitter account. Log Out / Change )

Facebook photo

You are commenting using your Facebook account. Log Out / Change )

Google+ photo

You are commenting using your Google+ account. Log Out / Change )

Connecting to %s