Burda Magazine Jersey Blazer 08/2016 #134

The Curvy Year of Sewing Jackets and Blazers theme was the perfect opportunity to finally make this Burda blazer. I keep talking about making a million blazers and then never doing the thing. I think starting here is a great gateway into maybe finally making the Vogue Claudia Shaeffer blazer of my dreams.

The Burda Jersey Blazer #134 from August 2016 issue is a lined jersey blazer with a shawl collar and patch pockets. I’m not sure if you know, but I am a fan of Burda. I can always rely on their drafting for getting a good fit with some adjustments. Mostly, I love the classic styles they have. I don’t love their lack of instructions, however, and they certainly are famous for sparse instructions in their magazines. Burda plus sizes range from size 44 (39.25 inch/100 cm bust) to size 52 (48 inch/122 cm bust). Admittedly, not the greatest size range, but it works for me with minor adjustments.

My measurements are: 51/52 bust, 46 waist, and 54/56 hip (depending on my swelling that day due to my chronic illness). I made a size 52 with a 2 inch FBA (adding 4 inches overall) and a 2 inch full bicep adjustment. I added 4 extra inches to the bust to allow for a button closure. The original pattern is meant to sit open, but I often want to pull blazers closed and quite frankly I think the look works well with the Cashmerette Rivermont, which was my planned pairing for this blazer.

Let’s talk fit issues. The blazer is long on me. I am a shorter person at 5’3″ and I have short arms. I prefer longer sleeves that cover my hands since they get cold easily. The back could use a sway back adjustment as well as a bit more room in the hips, which would help the pulling at the front button. I think the bust looks good. I do wish I had but in 2 buttons and may be adding that later, but we’ll see if I ever get around to that. For future versions, I will shorten the length overall, as well as do a swayback and full hip adjustment.

I love the blazer in spite of that and for most non-sewists those issues are minor.

My favourite details of this blazer are the purple piping along the lapel and the small purple buttons on the sleeve vents. Speaking of the sleeve vents, the instructions weren’t very good to help me do my first sleeve vent. I actually used this tutorial from Patterns Scissors Cloth. It was fantastic in holding my hand throughout the process.

I used a medium weight poly blend jersey in a dark grey. The piping is Wrights pre-made piping from Funky Monkey Fabrics. Buttons are sourced locally. I didn’t line the blazer. I don’t think it needs the lining at all. I used my serger for the most of the construction so the insides are nice anyway. I made shoulder pads for the blazer using the grey jersey and some poly padding I had leftover from a previous project. Easier than buying shoulder pads and they match my blazer.

Construction, except for the sleeve vents, went together really easily. With the tutorial, the sleeve vents were a breeze. The instructions were no help there. My one issue with the pattern is that the back facing seemed unnecessary. The lapel is cut on and then facing is sew on. The front facing pieces attach at the back and then get sewn into the seams below the pockets. The back facing is supposed to be attached to a cut out part on the front facing and then sewn into the seams on the shoulders and back neckline. It is likely my error with adding in the seam allowances (since I eyeball them when cutting out the pattern) and not using a lining, but the piece wasn’t necessary to me and could have been incorporated into the front facing piece which has a seam at the back anyway. I was able to sew the front facings to the back neckline and the shoulders without the back facing piece. Likely my error, but also possible not. I will see the result with a more stable knit since I plan to use a tan knit next time with blue piping.

TL:DR Review

  • Pattern: Burda Jersey Blazer #134 from August 2016 issue
  • Pros: Great size range. Jersey means comfort! Opportunity for customization. Love those princess seams.
  • Cons: A little long. Burda does tend to think that plus sized equals tall so I often have to shorten things. Unnecessary back facing piece possibly. Easy to draft out, though. Terrible instructions.
  • Make again?: YESYESYES
  • Rating: pink-star-black-md pink-star-black-mdpink-star-black-mdpink-star-black-md4/5 stars

 

Advertisements

10 thoughts on “Burda Magazine Jersey Blazer 08/2016 #134

  1. This is a great jacket. I love the purple details with the piping and the buttons–it’s a perfect way to take a basic gray blazer and turn it into something that is so you!

  2. Pingback: Me-Made-May 2018 Round up | Sew Pretty in Pink

  3. Pingback: Top 5 2018 and #2019MakeNine | Sew Pretty in Pink

I love comments, but sometimes I may be slow to respond/approve. I will respond though. :)

Fill in your details below or click an icon to log in:

WordPress.com Logo

You are commenting using your WordPress.com account. Log Out /  Change )

Google+ photo

You are commenting using your Google+ account. Log Out /  Change )

Twitter picture

You are commenting using your Twitter account. Log Out /  Change )

Facebook photo

You are commenting using your Facebook account. Log Out /  Change )

Connecting to %s

This site uses Akismet to reduce spam. Learn how your comment data is processed.