While I’ve been gone

It’s been a while since I posted. I’ve been busy with a lot of pattern testing that I can’t share yet and a costume project that I can share, but didn’t take many pictures of, and a few other smaller projects one of which I will share in a different post.

20180207_221522

For the costume project, I took apart a suit and two jumpsuits to make them tearable for a friend’s sketch show. This is the only picture I took, but it reminds me of Flat Stanley and makes me giggle a lot. The suit ultimately needed to be made into a jumpsuit and then the front needed to tear away from the back.

My old Brother SQ9050 kind of died after this project. I broke about 10 needles during the project and it struggled through every bit of it. Afterwards, the feed dogs just stopped working completely. RIP Jane Eyre. Rochester, my serger, will be in mourning forever… I do want to see if I can fix Jane so I can use her as a backup machine or even use the different stitches. I don’t want to take her into a shop, though, so it would be purely DIY. I did that with my serger at one point and fixed the timing. I think the connection to the feed dogs is probably where to look. And I looked briefly at the Brother site and saw that parts are available including new feed dogs.

20180306_143405

Meet Brienne of Tarth. She’s a Singer Heavy Duty 4452 that I purchased off Amazon.

Brienne of Tarth is aptly named because she is a workhorse and can take anything I throw at her. She has a metal frame and a fast motor meaning I can go up to 11,000 stitches per minute. So far, I love this new machine. Moving from a computerized to a manual machine is a bit of a learning curve, but not impossible. My first machine was manual, but I didn’t really remember a lot from that time. I also think I didn’t really learn what I could about the stitch settings and am taking my time to learn with this new machine. I thought at one point I would save up to get a Pfaff, but I think that is out of range for now. The positive of this machine is that is extremely affordable. I’ll do a full review after I work with it for some more time, but so far is is doing a far better job than my Brother ever did.

I started off with a simple project of some fabric bins for the first project with Brienne.

20180307_211139

I used this tutorial on Birch Fabrics to make them for my friend. I did change the shape slightly into a rectangle due to a cutting error, but I love the rectangular shape. I also used fusible foam instead of a heavy interfacing so they stood up better. I have fabric and foam left to make myself a couple of fabric bins.

This past weekend, I made a Concord top and redid my tester version of the Belmont leggings so they fit and I cropped them off in hopes that Spring may arrive here some day…

20180310_200012

The fabric is a bamboo jersey and is quite lovely. Grey seems to be a theme lately with me since I just cut out another grey project and have two others planned. I’m not entirely in love with the colour or lack of colour, but can see potential for layering and pairing with obnoxiously bright neon colours. I am also working on a grey Seamwork Jill Coatigan:

20180313_160752

The fabric is a gorgeous heavy wool knit blend with stripes on one side and floral on the other. I decided to go with the stripes on the outside, but have the floral showing on the collar. I ran out of fabric as well so I had to cut the pocket and the tie I decided to add from a dark wool. To make the whole thing less blah, I will be finishing the inside seams with a lime green bias tape made from the fabric in the bins above. 😀 I shortened the coat by about 10 inches for two reasons: 1) I am super short (5’3″ at last measuring) and the hem would have hit me at mid calf when it is supposed to hit mid-thigh; 2) And then when I was cutting it out…. I had to shorted it again to get the main pieces to fit on the fabric and they *just* fit. This actually might hit me mid-thigh now…which makes me wonder if they made the pattern for a person with Brienne’s proportions… I’m excited to share this later on this month on the CSC and then again here. Cross your fingers it all goes well.

I also recently made a new knit dress, but I will share that in a different post. 🙂

In other news, I received my first sewing magazines in the mail from Ottobre. The CSC editors were offered them for free. I have a few favs from them and at the top is that pink babydoll dress on the right hand cover of the Spring/Summer 2018 issue. I just have to get some tracing paper and then I should be ready to go.

20180218_114646

I have some pretty intense costume projects coming up for improv performances at festivals in the summer and early fall. I will need to plan them out and I’ll share the process here. It’s pretty exciting, actually, since we have a costume budget! But it is a budget so I will have to think carefully of the plans for it. After all the costumes are created, we can use them for more festivals in the future as well as runs of our improv shows. The troupe is pretty excited about all that. Speaking of the troupe, if you are at Toronto Comicon this weekend, check us out:

Advertisements

Cashmerette Belmont Leggings

Today I am sharing my Cashmerette Belmont leggings. Earlier this week, I shared my Cedar Dolman top. Both the Cedar set and the Belmont set were released together and tested together. I haven’t tried the Cedar tank or the Belmont yoga pants, but both are on my list to try. As with the Cedar top, I tested the Belmont leggings and received the final pattern for free. But my opinions are my own and definitely not from a robot or created by predictive text. HA!

The Belmont leggings have side seams and inner seams as well as a separate waistband. I thought I would hate all those seams, but I actually don’t and it makes it easier to squeeze them into a small amount of fabric. My TNT leggings pattern has just one pattern piece. I took apart Old Navy leggings to make it. However, the inner seams on the legs twist about no matter the fabric type and the rise is always a bit off depending on the fabric. I was coming to the conclusion that I either needed to tweak it or finally find a good pattern for leggings when Jenny messaged me about the testing on the Belmont leggings.

I have tried Cake Patterns Espresso leggings and Patterns for Pirates Peg Legs and hated both. They were very tight, very long (hello 5’3″ here!), and just didn’t work out for me.

I’ll be honest, my tester version weren’t as good. Which is why I am so never sharing them here! I do have pictures of me with the waistband pulled up really high that are funny, but I’d prefer to keep them for private laughs.

My final version of these is so close to perfect! I made a size 24. The only adjustment I made was to cut off about 5 inches in length, my standard for pants/leggings. I also added a cuff to the bottom since hemming knits is the WORST (#lazytips).

The fabric I used is a fleece-back poly from Water Tower Textiles in Heather Navy. The texture of the right side of the fabric is smooth and soft to the touch with a bit of a “wind proof” feel to it. The wrong side is a super soft fleece. The fabric is thinner than I expected. My experience of fleece-back poly is that it is pretty thick. I don’t find the warmth is lost by the thinner fabric, though. If anything, it makes them a bit more breathable, but still keep the heat in when walking around.

 

I love the leggings. I squeezed this pair into 1 metre of the fleece-back poly (shortened by 5 inches) which makes them a great project for small amounts of fabric.

There are literally no adjustments I would make for future versions of these. They fit perfectly.

Of note, the top I am wearing is a lovely bamboo/viscose Concord tank top. It’s so soft and comfy. I usually throw it on as pjs, because it is like being wrapped in a blanket.

TL:DR Review

  • Pattern: Cashmerette Belmont Leggings
  • Pros: Everything! I adore this pattern!
  • Cons:  Um?
  • Make again?: Absolutely! I have fabric for 4 more pairs in more fleece-back poly from Water Tower Textiles (they should start sponsoring me….ha!).
  • Rating: pink-star-black-md pink-star-black-mdpink-star-black-mdpink-star-black-mdpink-star-black-md5/5 stars